FFP2 Respiratory Mask Black, 10 pcs

Product features:

Product and Model Designation: Particle Filtrating Half Mask, Model: SH-ZK12
Manufacturer: Zhejiang Shaohua Medical Equipment Co., Ltd.
Sterility: individually packed
Color: outside: black; Inside: white
Material: nonwoven fabric
Washable: no
Dimensions: approx. 16.5 x 10.5 cm

Certificate of the FFP2 respirator

Storage: In a well-ventilated room at a temperature of -30 ° C to 40 ° C and a relative humidity of not more than 80% to avoid high temperatures. If this condition fulfills, the shelf life is 3 years.
Purpose of the mask: Masks serve to protect others as well as the own protection.
Carrier Duration: For occasional use up to 1 week.

Use:
FFP2-FFP2 half masks protect against solid and liquid particles, especially fine dusts up to 10 times the applicable MAK or TRK value.

Notes for users:
The best protection against potential virus transmission continues to provide the consistent distance from other, potentially virus-carrying persons. Nevertheless, the physical barrier, which represents the correct wearing of a mouth-nose mask, can provide a certain protection function.

Persons who want to wear a corresponding mask should therefore be considered the following rules:

• The masks should only be used for private use.
• The common hygiene regulations, in particular the current recommendations of the Robert Koch Institute (www.rki.de), the Federal Center for Health Enlightenment (www.infektionsutschutz.de) must be observed.
• Even with a mask, the distance recommended by the WHO should be adhered to at least 1.50 m to others.
• When putting on a mask, make sure that the inside is not contaminated. The hands should be thoroughly washed thoroughly with soap.
• The mask must be properly placed over mouth, nose and cheeks and at the edges as close as possible to minimize the penetration of air on the sides.
• At first use, it should be tested whether the mask leaves enough air to hinder normal breathing as little as possible.
• A humidified mask should be removed immediately and, if necessary, be replaced.
• The outside of the used mask is potentially exciting. In order to prevent contamination of the hands, it should not be touched as if as possible.
• After discontinuing the mask, the hands should be thoroughly washed under compliance with general hygiene rules (at least 20-30 seconds with soap).
• If available, all manufacturer's instructions should be observed.

Use:
1. Set the mask on the chin. The nose bracket points upwards.
2. Place the ear loops behind the ears.
3. Use both hands to fit the nose bracket to your nose back anm to achieve optimal sealing on the nose area.
4. Passport control: Enclose the mask with both hands and breathe deeply from the air outlet on the nose bracket this must be pressed more. For air outlet in other places, the seat of the mask easily change and adjust the face shape.
5. If the mask is damaged or if breathing becomes more difficult, replace a mask immediately.

Source: Information of the packaging; Own information
Status: 01/2021